Warehouse & Logistics Robotics Components Built for Repeatable Performance
RobotPartsCNC provides precision CNC machining for AMR, AGV, and automated storage systems. We balance structural rigidity, weight optimization, and precise mechanical fits from prototype validation through mid-volume production.
±0.01 mm
Standard tolerance
3 to 5-axis
Milling capability
5,000+
Piece production scale
Production focus
Stable mid-volume manufacturing, multi-SKU control, and long-term repeat orders for evolving robotics platforms.
Built around your assembly
Precision components for logistics automation
We machine critical components that support reliable motion, accurate sensing, and repeatable assembly in demanding warehouse environments. Each part is produced to your CAD models, 2D drawings, and tolerance requirements.
Drive modules & wheel hubs
Precision-turned hubs and housings designed for high load capacity, concentricity, and tight bearing tolerances.
Chassis & structural frames
Machined plates, brackets, and structural parts that maintain alignment while carrying dynamic loads.
Sensor & LiDAR mounts
High-tolerance mounting interfaces that help maintain accurate sensor positioning and calibration.
Actuator & drive housings
Aluminum and steel enclosures with precision bores for gearboxes, motors, gear reduction, and motion control.
End-effectors & grippers
Custom tooling, finger assemblies, and picking components for sorting and material-handling tasks.
Multi-SKU mechanical parts
A coordinated production approach for large chassis plates, small precision hardware, and evolving design revisions.
Production that scales with your platform
Mid-volume production and multi-SKU management
Robotics programs often move through frequent design iterations while several SKUs must remain production-ready. RobotPartsCNC supports the transition from prototype verification to batches of 50, 500, or 5,000+ pieces.
Discuss your production rampConsistency
Strict adherence to tolerances across repeat production orders.
Efficiency
Optimized fixture design reduces setup times and unit costs for mid-volume batches.
Traceability
Lot control and inspection reporting support quality management systems.
Scalability
Diverse geometries can be handled within one project, from chassis plates to precision parts.
Technical capabilities
Designed for demanding robotics geometry
Our 3-axis to 5-axis milling and precision turning capabilities support complex features in fewer setups, helping control dimensional variation and assembly risk.
| Feature | Capability |
|---|---|
| Standard tolerance | ±0.01 mm |
| Tight tolerance | ±0.005 mm |
| Surface roughness | Ra 0.4–3.2 μm |
| Maximum milling size | 1000 × 600 × 600 mm |
| Maximum turning size | Ø400 × 800 mm |
Bearing fits
Precision bores support stable fit and service life in rotating assemblies.
Rotating shafts
Concentricity controls help maintain smooth, repeatable motion.
Mounting patterns
True-position control supports accurate chassis, motor, and sensor assembly.
Materials & finishing
Choose the right balance of weight, wear, and protection
We coordinate material selection and secondary processes around your robot’s operating environment, load requirements, and appearance specifications.
Metals
Aluminum 6061-T6 and 7075-T6; stainless steel 303, 304, 316, and 17-4PH; carbon steel 1045 and 4140; and brass.
Engineering plastics
POM (Delrin), PEEK, Nylon, and UHMW for lightweight or wear-resistant applications.
Surface treatments
Hard anodizing, electroless nickel plating, passivation, powder coating, and black oxide for durability, corrosion protection, and finish consistency.
Quality assurance
Inspection that protects assembly fit
Robotics assemblies depend on the fit of individual parts. Our inspection process verifies components against CAD models and 2D drawings before they move into your assembly flow.
Documentation available on request
Support your quality system with documentation matched to your project requirements.
- ✓First Article Inspection (FAI) reports
- ✓Dimensional inspection reports
- ✓Material certificates
- ✓Lot control and repeat-order traceability
Manufacturing ecosystem in Shenzhen
An engineering extension for your production ramp
Located in Shenzhen, RobotPartsCNC has direct access to a comprehensive manufacturing supply chain. We consolidate machining, heat treatment, surface finishing, and assembly logistics into a streamlined workflow.
During design review, our team evaluates CAD files for DFM issues such as thin walls, deep cavities, and tolerance stack-ups. This helps reduce avoidable cost and delays before production begins.
From design review to repeat order
Review
Assess CAD, drawings, materials, tolerances, and production volume.
Validate
Support prototype verification and resolve manufacturing risks early.
Scale
Manage multi-SKU batches and stable long-term repeat production.
Common questions
Plan your robotics production with confidence
Request a quote
Move your warehouse robotics project toward production
Send your 3D CAD files and 2D drawings to receive a proposal based on your required volume, materials, finishes, and tolerance requirements.
Project contact
Email: info@robotpartscnc.com
Address: